View 10-FZ122PA050SC01-P997F18_8674546.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

fz12 / f0122pa050sc01 preliminary datasheet flowphase0 1200v/50a trench fieldstop igbt 4 technology 2-clip housing in 12mm and 17mm height compact and low inductance design aln substrate for improved performance motor drive ups fz122pa 0 50sc01 f0122pa 0 50sc01 t j =25c, unless otherwise specified parameter symbol value unit inverter transistor t h =80c 69 t c =80c 86 t h =80c 211 t c =80c 320 t sc t j 150c 10 s v cc v ge =15v 800 v inverter diode t h =80c 69 t c =80c 90 t h =80c 149 t c =80c 226 dc forward current a t j =t j max t p limited by t j max a i f 100 peak repetitive reverse voltage gate-emitter peak voltage t p limited by t j max maximum junction temperature power dissipation per igbt v ge t j max p tot short circuit ratings v c v types maximum ratings condition features flow0 housing target applications schematic i frm t j max repetitive peak forward current power dissipation per diode v w collector-emitter break down voltage repetitive peak collector current dc collector current v ce i cpulse i c w a 150 a 1200 175 1200 v rrm p tot 175 maximum junction temperature c t j =t j max t j =25c t j =t j max t j =t j max 20 1 revisi on: 1 copyright by vincotech
fz12 / f0122pa0 50sc01 preliminary datasheet t j =25c, unless otherwise specified parameter symbol value unit maximum ratings condition thermal properties insulation properties v is t=2s dc voltage 4000 v min 12,7 mm min 12,7 mm clearance insulation voltage creepage distance t op operation temperature under switching condition -40?+(tjmax - 25) c storage temperature t stg -40?+125 c 2 revisi on: 1 copyright by vincotech
fz12 / f0122pa 050sc01 preliminary datasheet parameter symbol unit v ge [v] or v gs [v] v r [v] or v ce [v] or v ds [v] i c [a] or i f [a] or i d [a] t j min typ max tj =25c 5 5,8 6,5 tj =150c tj =25c 1,5 1,96 2,3 tj =150c 2,33 tj =25c 0,02 tj =150c tj =25c 700 tj =150c tj =25c 102 tj =150c 106 tj =25c 17 tj =150c 24 tj =25c 225 tj =150c 289 tj =25c 97 tj =150c 131 tj =25c 2,49 tj =150c 4,04 tj =25c 2,88 tj =150c 4,63 t hermal re si stance chip to heatsink per chip r thjh 0,45 thermal resistance chip to case per chip r thjc tj =25c 1 1,76 2,2 tj =150c 1,69 tj =25c 80,03 tj =150c 87 tj =25c 128,7 tj =150c 290,7 tj =25c 4,26 tj =150c 8,9 di ( rec ) max t j =25c 4953 /d t tj =150c 1407 tj =25c 1,57 tj =150c 3,55 t hermal re si stance chip to heatsink per chip r thjh 0,64 thermal resistance chip to case per chip r thjc v pf mws ? ns ns ma 193 2770 205 rgon=8 ? 600 25 0 1200 50 0,0018 rgoff=8 ? 15 600 50 gate-emitter leakage current integrated gate resistor inverter transistor gate emitter threshold voltage fall time turn-off delay time turn-on delay time rise time gate charge reverse recovery time reverse recovered energy peak rate of fall of recovery current reverse recovered charge inverter diode diode forward voltage 15 50 50 f=1mhz rgon=8 ? 0 20 15 a c mws a/ s 160 characteristic values value conditions input capacitance output capacitance turn-off energy loss per pulse collector-emitter saturation voltage turn-on energy loss per pulse collector-emitter cut-off current incl. diode erec c oss r gint t f e on e off i rrm t d(on) c rss i ges v ge(th) v ce(sat) i ces c ies q rr t rr v f peak reverse recovery current reverse transfer capacitance q gate t r t d(off) v ce =v ge 0 15 v nc v na tj=25c 4 tj=25c k/w thermal foil thickness=76um kunze foil ku- a lf5 k/ w thermal foil th i ckness=76um kunze foil ku- a lf5 3 revision : 1 copyright by vincotech
fz12 / f0122pa 0 50sc01 preliminary datasheet figure 1 output inverter igbt figure 2 output inverter igbt typical output characteristics i c = f(v ce ) i c = f(v ce ) at at t p = 350 s t p = 350 s t j = 25 c t j = 150 c v ge from 7 v to 17 v in steps of 1 v v ge from 7 v to 17 v in steps of 1 v figure 3 output inverter igbt figure 4 output inverter fred typical transfer characteristics typical diode forward current as i c = f(v ge ) a function of forward voltage i f = f(v f ) at at t p = 350 s t p = 350 s v ce = 10 v output inverter typical output characteristics 0 30 60 90 120 150 012345 v ce (v) i c (a) 0 10 20 30 40 50 024681012 v ge (v) i c (a) t j = 25c t j = t jmax -25c 0 30 60 90 120 150 00,511,522,53 v f (v) i f (a) t j = 25c t j = t jmax -25c 0 30 60 90 120 150 012345 v ce (v) i c (a) 4 revisi on: 1 copyright by vincotech
fz12 / f0122pa 0 50sc01 preliminary datasheet figure 5 output inverter igbt figure 6 output inverter igbt typical switching energy losses typical switching energy losses as a function of collector current as a function of gate resistor e = f(i c ) e = f(r g ) with an inductive load at with an inductive load at t j = 25/150 c t j = 25/150 c v ce = 600 v v ce = 600 v v ge = 15 v v ge = 15 v r gon = 8 ? i c = 50 a r goff = 8 ? figure 7 output inverter igbt figure 8 output inverter igbt typical reverse recovery energy loss typical reverse recovery energy loss as a function of collector current as a function of gate resistor e rec = f(i c )e rec = f(r g ) with an inductive load at with an inductive load at t j = 25/150 c t j = 25/150 c v ce = 600 v v ce = 600 v v ge = 15 v v ge = 15 v r gon = 8 ? i c = 50 a output inverter e on high t e off high t e on low t e off low t 0 1,5 3 4,5 6 7,5 9 0 2 04 06 08 01 0 0 i c (a) e (mws) e off high t e on high t e on low t e off low t 0 1,5 3 4,5 6 7,5 9 0 8 16 24 32 40 r g ( ) e (mws) t j = t jmax -25c e rec t j = 25c e rec 0 1 2 3 4 5 0 20406080100 i c (a) e (mws) t j = t jmax -25c e rec t j = 25c e rec 0 1 2 3 4 5 0 8 16 24 32 40 r g ( ) e (mws) 5 revisi on: 1 copyright by vincotech
fz12 / f0122pa 0 50sc01 preliminary datasheet figure 9 output inverter igbt figure 10 output inverter igbt typical switching times as a typical switching times as a function of collector current function of gate resistor t = f(i c ) t = f(r g ) with an inductive load at with an inductive load at t j = 150 c t j = 150 c v ce = 600 v v ce = 600 v v ge = 15 v v ge = 15 v r gon = 8 ? i c = 50 a r goff = 8 ? figure 11 output inverter fred figure 12 output inverter fred typical reverse recovery time as a typical reverse recovery time as a function of collector current function of igbt turn on gate resistor t rr = f(i c ) t rr = f(r gon ) at at t j = 25/150 c t j = 25/150 c v ce = 600 v v r = 600 v v ge = 15 v i f = 50 a r gon = 8 ? v ge = 15 v output inverter t doff t f t don t r 0,001 0,01 0,1 1 0 2 04 06 08 01 0 0 i c (a) t ( s) t j = t jmax -25c t rr t j = 25c t rr 0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0 8 16 24 32 40 r gon ( ) t rr ( s) t doff t f t don t r 0,001 0,01 0,1 1 0 8 16 24 32 40 r g ( ) t ( s) t j = t jmax -25c t rr t rr t j = 25c 0 0,08 0,16 0,24 0,32 0,4 0 2 04 06 08 01 0 0 i c (a) t rr ( s) 6 revis ion: 1 copyright by vincotech
fz12 / f0122pa 0 50sc01 preliminary datasheet figure 13 output inverter fred figure 14 output inverter fred typical reverse recovery charge as a typical reverse recovery charge as a function of collector current function of igbt turn on gate resistor q rr = f(i c )q rr = f(r gon ) at at at t j = 25/150 c t j = 25/150 c v ce = 600 v v r = 600 v v ge = 15 v i f = 50 a r gon = 8 ? v ge = 15 v figure 15 output inverter fred figure 16 output inverter fred typical reverse recovery current as a typical reverse recovery current as a function of collector current function of igbt turn on gate resistor i rrm = f(i c )i rrm = f(r gon ) at at t j = 25/150 c t j = 25/150 c v ce = 600 v v r = 600 v v ge = 15 v i f = 50 a r gon = 8 ? v ge = 15 v output inverter t j = t jmax - 25c i rrm t j = 25c i rrm 0 30 60 90 120 150 180 0 8 16 24 32 40 r gon ( ) i rrm (a) t j = t jmax -25c q rr t j = 25c q rr 0 3 6 9 12 15 0 8 16 24 32 40 r gon ( ) q rr ( c) t j = t jmax -25c i rrm t j = 25c i rrm 0 30 60 90 120 150 0 20406080100 i c (a) i rrm (a) t j = t jmax -25c q rr t j = 25c q rr 0 3 6 9 12 15 0 20406080100 i c (a) q rr ( c) 7 revisi on: 1 copyright by vincotech
fz12 / f0122pa 0 50sc01 preliminary datasheet figure 17 output inverter fred figure 18 output inverter fred typical rate of fall of forward typical rate of fall of forward and reverse recovery current as a and reverse recovery current as a function of collector current function of igbt turn on gate resistor di 0 /dt,di rec /dt = f(i c )d i 0 /dt,di rec /dt = f(r gon ) at at t j = 25/150 c t j = 25/150 c v ce = 600 v v r = 600 v v ge = 15 v i f = 50 a r gon = 8 ? v ge = 15 v figure 19 output inverter igbt figure 20 output inverter fred igbt transient thermal impedance f red transient thermal impedance as a function of pulse width as a function of pulse width z thjh = f(t p )z thjh = f(t p ) at at d = t p / t d = t p / t r thjh = 0,45 k/w r thjh = 0,64 k/w igbt thermal model values fred thermal model values r (c/w) tau (s) r (c/w) tau (s) 0,04 2,8e+00 0,02 9,5e+00 0,07 5,6e-01 0,08 1,1e+00 0,16 8,6e-02 0,14 1,4e-01 0,10 3,0e-02 0,26 3,4e-02 0,04 2,7e-03 0,08 3,9e-03 0,03 3,7e-04 0,06 4,6e-04 output inverter t p (s) z thjh (k/w) 10 0 10 -1 10 -2 10 -4 10 -3 10 -2 10 -1 10 0 10 1 1 10 -5 d = 0,5 0,2 0,1 0,05 0,02 0,01 0,005 0.000 t p (s) z th-jh (k/w) 10 0 10 -1 10 -2 10 -4 10 -3 10 -2 10 -1 10 0 10 1 1 10 -5 d = 0,5 0,2 0,1 0,05 0,02 0,01 0,005 0.000 t j = t jmax - 25c di 0 /dt di rec /dt high t di rec /dt t j = 25c 0 2000 4000 6000 8000 10000 0 8 16 24 32 40 r gon ( ) di rec / dt (a/ s) di 0 /dt high t di rec /dt high t di rec /dt low t di o /dt low t 0 1000 2000 3000 4000 5000 6000 0 2 04 06 08 01 0 0 i c (a) di rec / dt (a/ s) di rec /dt di 0 /dt 8 revisi on: 1 copyright by vincotech
fz12 / f0122pa 0 50sc01 preliminary datasheet figure 21 output inverter igbt figure 22 output inverter igbt power dissipation as a collector current as a function of heatsink temperature function of heatsink temperature p tot = f(t h )i c = f(t h ) at at t j = 175 c single heating t j = 175 c overall heating v ge = 15 v figure 23 output inverter fred figure 24 output inverter fred power dissipation as a forward current as a function of heatsink temperature function of heatsink temperature p tot = f(t h )i f = f(t h ) at at t j = 175 c single heating t j = 175 c overall heating output inverter 0 100 200 300 400 0 50 100 150 200 t h ( o c) p tot (w) 0 10 20 30 40 50 60 70 80 90 100 110 0 50 100 150 200 t h ( o c) i c (a) 0 50 100 150 200 250 300 0 50 100 150 200 t h ( o c) p tot (w) 0 10 20 30 40 50 60 70 80 90 100 110 0 50 100 150 200 t h ( o c) i f (a) 9 revisi on: 1 copyright by vincotech
fz12 / f0122pa 0 50sc01 preliminary datasheet figure 25 output inverter igbt figure 26 output inverter igbt safe operating area as a function gate voltage vs gate charge of collector-emitter voltage i c = f(v ce )v ge = f(q ge ) at at d = single pulse i c = 50 a t h = 80 oc v ge = 15 v t j =t jmax oc output inverter v ce (v) i c (a) 10 3 10 0 10 -1 10 1 10 2 10 1 10 2 10us 100us 1ms 10ms 100ms dc 10 0 10 3 0 2 4 6 8 10 12 14 16 0 20 40 60 80 100 120 140 160 180 200 220 240 q g (nc) v ge (v) 240 v 960 v 10 revis ion: 1 copyright by vincotech
fz12 / f0122pa 0 50sc01 preliminary datasheet t j 150 c r g on 8 ? r goff 8 ? figure 1 output inverter igbt figure 2 output inverter igbt turn-off switching waveforms & definition of t dof f , t eof f turn-on switching waveforms & definition of tdon, t eon (t eof f = integrating time for e of f )( t eon = integrating time for e on ) v ge (0%) = -15 v v ge (0%) = -15 v v ge (100%) = 15 v v ge (100%) = 15 v v c (100%) = 600 v v c (100%) = 600 v i c (100%) = 50 a i c (100%) = 50 a t doff = 0,29 s t don = 0,10 s t eoff = 0,70 s t eon = 0,33 s figure 3 output inverter igbt figure 4 output inverter igbt turn-off switching waveforms & definition of t f turn-on switching waveforms & definition of t r v c (100%) = 600 v v c (100%) = 600 v i c (100%) = 50 a i c (100%) = 50 a t f = 0,13 s t r = 0,03 s switching definitions output inverter general conditions = = = i c 1% v ce 90% v ge 90% -40 -20 0 20 40 60 80 100 120 140 -0,2 -0,05 0,1 0,25 0,4 0,55 0,7 0,85 time (us) % t doff t eoff v ce i c v ge i c10% v ge10% t don v ce 3% -50 0 50 100 150 200 250 300 2,8 2,95 3,1 3,25 3,4 3,55 3,7 time(us) % i c v ce t eon v ge fitted i c10% i c 90% i c 60% i c 40% -20 0 20 40 60 80 100 120 140 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5 time (us) % v ce i c t f i c10% i c 90% -50 0 50 100 150 200 250 300 2,95 3,025 3,1 3,175 3,25 3,325 3,4 time(us) % tr v ce ic 11 revis ion: 1 copyright by vincotech
fz12 / f0122pa 0 50sc01 preliminary datasheet figure 5 output inverter igbt figure 6 output inverter igbt turn-off switching waveforms & definition of t eof f turn-on switching waveforms & definition of t eon p off (100%) = 30,25 kw p on (100%) = 30,25 kw e off (100%) = 4,66 mj e on (100%) = 4,02 mj t eoff = 0,70 s t eon = 0,33 s figure 7 output inverter fred figure 8 output inverter igbt gate voltage vs gate charge (measured) turn-off switching waveforms & definition of t r r v geoff = -15 v v d (100%) = 600 v v geon = 15 v i d (100%) = 50 a v c (100%) = 600 v i rrm (100%) = -87 a i c (100%) = 50 a t rr = 0,29 s q g = 2286,11 nc switching definitions output inverter i c 1% v ge 90% -20 0 20 40 60 80 100 120 -0,2 -0,05 0,1 0,25 0,4 0,55 0,7 0,85 time (us) % p o f f e off t eoff v ce 3% v ge 10% -50 0 50 100 150 200 250 2,9 3 3,1 3,2 3,3 3,4 3,5 time(us) % p on e on t eon -20 -15 -10 -5 0 5 10 15 20 -50 0 50 100 150 200 250 300 350 qg (nc) v ge (v) i rrm 10% i rrm 90% i rrm 100% trr -200 -160 -120 -80 -40 0 40 80 120 3 3,1 3,2 3,3 3,4 3,5 3,6 time(us) % i d v d fitted 12 revis ion: 1 copyright by vincotech
fz12 / f0122pa 0 50sc01 preliminary datasheet figure 9 output inverter fred figure 10 output inverter fred turn-on switching waveforms & definition of t qr r turn-on switching waveforms & definition of t erec (t qrr = integrating time for q r r )( t erec = integrating time for e rec ) i d (100%) = 50 a p rec (100%) = 30,25 kw q rr (100%) = 8,75 c e rec (100%) = 3,45 mj t qrr = 0,59 s t erec = 0,59 s switching definitions output inverter t qrr -200 -150 -100 -50 0 50 100 150 3 3,15 3,3 3,45 3,6 3,75 3,9 % i d q r r time(us) -20 0 20 40 60 80 100 120 3 3,15 3,3 3,45 3,6 3,75 3,9 time(us) % p rec e rec te rec 13 revis ion: 1 copyright by vincotech
fz12 / f0122pa 050sc01 preliminary datasheet version ordering code in datamatrix as in packaging barcode as without thermal paste 12mm housing 10-fz122pa 0 50sc01-p997f18 p997f18 p997f18 without thermal paste 17mm housing 10-f0122pa 0 50sc01-p997f19 p997f19 p997f19 outline pinout ordering code & marking ordering code and marking - outline - pinout 14 revis ion: 1 copyright by vincotech
fz12 / f0122pa 050sc01 preliminary datasheet product status definitions formative or in design first production full production disclaimer life support policy as used herein: preliminary this datasheet contains preliminary data, and supplementary data may be published at a later date. vincotech reserves the right to make changes at any time without notice in order to improve design. the data contained is exclusively intended for technically trained staff. final this datasheet contains final specifications. vincotech reserves the right to make changes at any time without notice in order to improve design. the data contained is exclusively intended for te chnically tr ained st aff. target product status datasheet status definition this datasheet contains the design specifications for product development. specific ations may change in any manner without notice. the dat a contained is exclusively intended for technica lly trai ned staff. the information given in this datasheet describes the type of component and does not represent assured characteristics. for tes ted values please contact vincotech.vincotech reserves the right to make changes without further notice to any products herein to i mprove reliability, function or design. vincotech does not assume any liability arising out of the application or use of any product o r circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. vincotech products are not authorised for use as critical components in life support devices or systems without the express wri tten approval of vincotech. 1. life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in labelling can be reasonably expected to result in significant injury to the user. 2. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 15 revisi on: 1 copyright by vincotech

▲Up To Search▲

Price & Availability of 10-FZ122PA050SC01-P997F18

	To Download 10-FZ122PA050SC01-P997F18 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .